Product

Screw Compressor

Main part of rotary screw air compressor is Air-end, consisting of a pair of rotors. Suction of air takes place through Inlet filter and suction control valve. Air – oil mixture from air-end flows into an air – oil separator. The separated oil flows through oil filter and after cooling in 'cooler', it gets back into the system. The air also passes through air cooler and to the receiver. The whole system is controlled through valves / sequence of compressor is done through electric /electronic control.

Rotary Screw Compressors: Oil Injected

This type of compressor injects a liquid into the compression chamber to cool and lubricate the compressor's moving parts, cool the air being compressed in the chamber, and help minimize leaks from returns into the chamber during discharge.

Zentech provides oil-injected screw compressors that deliver outstanding performance, high productivity and low cost of ownership.

Product Series :

SEG 5HP to 15 HP
Pressure Variants 7,8,10 &12 bar
SEM 20 HP to 500 HP
Pressure Variants 7,8,10 &12 bar
SEMV SERIES 20 hp to 500 HP with Variable Frequency Drive (VFD)
Pressure Variants 7,8,10 &12 bar

These compressors are easy to install. Read more about Product Features

Applications:

General Industry
Service Stations
Pneumatic Applications
Machinery

Our Brand:

Rotary Screw Compressors: Oil-Free

On air-cooled oil-free rotary screw compressors, outside air is used to cool the compressed air and the compressor elements. On water-cooled oil-free rotary screw air compressors, water is used to cool the oil, the compressed air and the compressor elements.

Product Series :